Wind Speed Monitoring Sensor, Strong Material ABS, Wind Cup, Interference Side/Bottom Cable Outlet, Weather Extension Cable Included, 4-20mA Power Supply

Spec:Item Type: Wind Speed Monitoring SensorMaterial: ABSSize: Approx. 158 x 180 x 70mm / 6.22 x 7.09 x 2.76inPower Supply Voltage: DC9-30V Output: 4-20mAMeasurement Range: Wind speed 0~45m/sExtension Line Length: Approx. 0.8m / 2.6ftAccuracy: ±(0.5+0.02V)m/s(V represent real time wind speed value)Resolution: 0.1m/sStartup Wind Speed: ≤0.8m/sMaximum Power Consumption: 0.48WLoad Capacity:DC12V power supply, current output impedance ≤350ΩDC24V power supply, current output impedance ≤900Ω, voltage output impedance ≥1KΩWorking Environment: Temperature: -35℃~60℃, Humidity: ≤100%RH non condensing Level: IP64Widely Used In: Greenhouses, environmental , ships, docks, aquaculture, advertising gate barriers, weather, marine, environmental, airports, ports, laboratories, industrial, agricultural and traffic environments for wind speed measurementFormula: 4-20mA: F=(I-4)/16xA+BF: Wind speed, m/s;I: Sensor output current value, mA;A: Sensor range width(range upper limit minus lower limit);B: Minimum value of sensor range(lower limit of range);Wire Connection Method:Red Output (voltage): Power supply positiveBlack Output (voltage): Power supply negativeYellow Output (voltage): Distribution Diameter: Approx. 63mm / 2.48inMounting Hole Diameter: Approx. 3.2mm / 0.13inAerial Plug Diameter: Approx. 15mm / 0.59in(recommended to reserve 25mm for wiring, wire connection first, then install and fix the sensor)packing list:1 x Wind Speed Monitoring Sensor

• STRONG MATERIAL: The wind cup is made of excellent ABS material, with , small starting wind speed, and good erosion
• INTERFERENCE The wind speed sensor has strong prevent interference ability, small and lightweight, easy to carry and assemble
• WIRING MODE: The wind speed monitoring sensor is compatible with two cable outlet modes, including bottom cable outlet and side cable outlet
• WEATHER Wind speed sensor anemometer possess strong pressure resistance, suitable for all kinds of harsh environment, with strong wind resistance
• EQUIPPED WITH EXTENSION CABLE: The wind speed sensor connection extension line is 0.8m long, the interface has a sealing washer design,